Can An Invisible Fence Be Installed Above Ground? (Solved!)

Can an invisible fence be installed above ground? In some situations, a homeowner may not want to put an invisible fence underground. An invisible fence can be installed above ground if necessary. Keep reading to learn more about installing an invisible fence above ground.

Can an invisible fence be installed above ground? 

Yes, an invisible fence will still work if it is installed above ground. It is very easy to install an invisible fence above ground and many homeowners are able to perform the installation themselves. It is very common for homeowners to install an invisible fence to safely keep their dogs in the yard so they don’t run off.

Should an invisible fence be installed above ground?

Even though an invisible fence will work above ground, it’s recommended to install them below the ground. This is mainly because the fence wire can get damaged easily. These wires are a lot safer when they are installed underground, and less likely to get broken or damaged. 

Will an invisible fence be safe if installed above ground?

The biggest challenge you will face installed an invisible fence above ground is making sure the wire doesn’t get damaged. All invisible fences have been tested and certified to ensure that they can handle anything mother nature throws their way, like moisture and strong UV. 

Can an invisible fence’s transmitter be installed above ground?

It’s very important to make sure the transmitter doesn’t become affected by the weather. If you are unable to install the invisible fence’s transmitter below ground, you will need to find a way to ensure it is protected. Some people will install the transmitter by a covered porch or under a dack to keep it safe.

Does an invisible fence installed above ground need to be in a closed loop?

In order for the invisible fence to work effectively, it needs to be in a closed loop. This means that both ends of the invisible fence wire need to be attached to the transmitter box. You will not be able to turn the invisible fence on until both ends of the fence are plugged into the transmitter.

Can you create a break in an invisible fence?

Depending on how you have the invisible fence setup, you may want to create a break in the fence. This will allow the dog to cross the fence in certain areas. To do this, you will need to twist the wire 8 times in the area that you want to break. Once you have done this, the dog will be able to pass by safely.

How can you make sure the invisible fence stays in place when installed above ground?

One thing that many homeowners worry about is an above ground invisible fence coming out of place. The easiest way to keep it in place is by simply using a staple gun. It is recommended to staple the fence wires every 6 to 10 feet in order to keep it secured. 

Get Our #1 Easy, Homemade Dog Food Recipe (Vet-Approved), 100% Free!!! Click to get it NOW!

When is it recommended to install an invisible fence above ground?

If you have a wooden or metal fence but your dog keeps escaping when the gate isn’t shut all the way, you may need to install an invisible fence. It would be a lot of work to install the fence underground if you already have a fence in your yard. In this case, you may have more success installing the invisible fence wire along the above ground fence.

Will snow affect the invisible fence?

During the winter you may have to keep an extra eye on your dogs when they go outside. This is because when the snow piles up high, it could block the signal from the invisible fence. Over winter, you may have more difficulties getting a signal from the invisible fence than in other seasons. 

What is the biggest issue homeowners face with above ground invisible fences?

The biggest problem most homeowners face with above ground invisible fences is that they don’t keep other animals out of their yard. Their dogs are not completely safe unless there is another fence installed along with the invisible fence. With only an invisible fence installed, intruders can easily enter the yard.

Can I use a robotic lawnmower with an above ground invisible fence?

A robotic lawnmower relies on a wire to determine where it can go. In most cases, people can use both a robotic lawnmower and an invisible fence. However, they need to be careful when setting these up because they don’t want to get the signals crossed. If the signals don’t interact, the homeowner shouldn’t experience any problems. 

Is it easy to damage an invisible fence that’s installed above ground?

Homeowners need to be careful when they are doing yard work near their above ground invisible fence because it’s very easy to damage. This is especially important when they are using a lawnmower or weed eater. People also need to be careful when they are digging or planting anything near the above ground wires. 

Is it better to install an invisible fence above ground or underground?

An invisible fence will work whether it’s installed above ground or underground, however, it will be a lot safer if it’s installed underground. Most professional installers will recommend installing an electric wire 1 to 3 inches underground. This will keep the wire safe in all circumstances.  

How long does an above ground invisible fence last?

Invisible fences are designed to last for 27 years when they are kept in the right conditions. By installing the fence above ground, you are exposing it to more situations that could lead to damage. Since invisible fence wires are very thin, they likely will not last as long when they are installed above ground. 

Will an invisible fence have a better signal above ground?

Many homeowners think that installing an invisible fence above ground will result in a better signal. This is necessarily true because invisible fence transmitters were designed to give off a high-quality signal from under the ground.