If you’re like most people, your dog is a beloved member of the family. You want to do everything in your power to keep them safe and happy, but what if they keep escaping through the driveway because there’s no gate? Perhaps you don’t even have a fence.
Fence installation can be expensive and time-consuming. So before you start digging up your lawn, read this blog post for some helpful tips on ways to fence off the driveway to prevent your dog from escaping. I’ll also show you 9 things every homeowner should know about installing driveway fences for dogs!
Table of Contents
- Physical Fence Options to Block the Driveway While Your Dog Is Outside
- Invisible Fence Options
- Reasons to Use an Underground Wired Fence for Your Driveway
- Reasons to Use a Wireless Invisible Fence for Your Driveway
- Can an Invisible Dog Fence Wire Go Under the Driveway?
- How Do I Run an Invisible Fence Wire Under My Driveway?
- How Deep Can You Bury Dog Fence Wire?
- Do Invisible Dog Fences Work in the Snow?
- Do Invisible Fences Work for Puppies?
Physical Fence Options to Block the Driveway While Your Dog Is Outside
There are a number of physical fence types that you can use to block off your driveway to keep your dog from getting too close to it. These options include, but are not limited to, the following:
- Chain Link
- Split Rail
Invisible Fence Options
Most of your invisible fence options for keeping your dog out of the driveway will come to two basic types. These are underground wire fences and completely wireless electronic systems.
If you have a convenient area under or very near to your driveway to bury the wires, you can make use of an underground pet fence system. This type of system is usually less expensive. The drawback is that, if you are renting your home or planning to leave soon, you have to be careful where you put all of the wires.
A wireless system may cost a bit more but will have the advantage of not leaving any marks wherever you place it. Wireless systems may be better for driveways that are part of a larger front yard area. You will need to adjust the radius of the signal to cover your whole yard while not interfering with your neighbor’s.
Reasons to Use an Underground Wired Fence for Your Driveway
There are a number of reasons why you may wish to make use of an underground wired fence to keep your dog out of your driveway. For one, this type of fence system is usually more cost effective to make use. The wires are also more likely to conduct the signal better so that you don’t have to worry about loss.
Underground wired fence systems can be more useful to train a puppy with. This is because they respond better to an actual physical barrier than an electronic one that they have to be made to understand. An underground wireless fence can also be an effective barrier to keep wild animals and neighbor dogs safely away.
Reasons to Use a Wireless Invisible Fence for Your Driveway
One of the very best reasons to use a wireless invisible fence to keep dogs out of your driveway is to avoid digging around in your front yard. This will be all the more crucial if you don’t actually own the home or are planning to move soon. You want to avoid doing anything that may leave marks on the property.
Can an Invisible Dog Fence Wire Go Under the Driveway?
If you want to run an invisible dog fence wire under your driveway, there are options that will allow you to do this. The easiest way will be to insert the wires in an expansion joint. You can also cut a slot to run the wire through by cutting a special insertion slot using a circular saw with a masonry blade.
You may also wish to go the route of tunneling under your driveway in order to bury the wire in an inconspicuous manner. Keep in mind that this will work best if you have a gravel driveway. Otherwise, you’re going to be putting in a lot of time, effort, and money. You’ll also be leaving clear marks on your property.
How Do I Run an Invisible Fence Wire Under My Driveway?
There are two methods you can use to run an invisible fence under your driveway. The first will be to run it under a gravel driveway in the following fashion:
- 1. Dig a trench through the gravel. It needs to go down at least 6 inches
- 2. Insert a PVC pipe or electrical conduit at the base of the trench
- 3. Run the wire through the PVC pipe
- 4. Fill the trench back in
- 5. Drive over it to make sure it has been properly compacted
The second method will be to cut an insertion slot with a circular saw that has a masonry blade. This can be accomplished in the following manner:
- 1. Use chalk to draw the line that you want to cut
- 2. Cut the line using the saw. Make sure to have goggles on for protection and keep your dog inside as you use the saw
- 3. Lay your fence wire in the slot
- 4. Use concrete caulk to seal the slot
How Deep Can You Bury Dog Fence Wire?
The usual depth for burying your underground dog wire should be about 6 inches. This is deep enough to make the wire inconspicuous and to keep your dog from digging it up with their paws. If your dog is a larger breed or a devoted digger, you can bury it a few inches deeper to achieve the same effect.
The idea is to bury it deep enough to keep it from getting rooted up by your dog or rising to the surface after a rain. But if you bury it too deep, you lose signal strength. You may need to experiment a bit to get the correct depth.
Do Invisible Dog Fences Work in the Snow?
You may find yourself losing some signal strength during the winter due to the cold climate. Electricity doesn’t conduct as well through snow. The answer will be to place your conductors closer together so that the signal will not have to travel as far.
Do Invisible Fences Work for Puppies?
The answer is yes but only if you take the time and effort to train them. A puppy will have a harder time adapting to an invisible barrier. With a bit of love and patience, not to mention plenty of treats, you can get your puppy to accept the fence.