DIY doggie door panels that slide into glass sliding doors are the easiest to install, but if you want to cut a hole in a wooden or PVC door the installation becomes much harder.
Installing a doggie door varies in difficulty depending on your existing door and what kind of doggie door you want.
Note: If you click some of the links or pictures in this article we may earn a small commission at no additional cost to you.
Table of Contents
- How Much Does It Cost To Install a Doggie Door Yourself?
- How Do Can I Install A Doggie Door Myself?
- Can You Install a Doggie Door into a Brick Wall?
- Can You Put a Doggie Door on an Interior Wall?
- How Much Does It Cost to Install a Doggie Door in a Wall?
- How Do I Stop Rain Coming in Through My Doggie Door?
- Can I Buy A pre-Cut Doggie Door?
- What Are The Benefits of a Doggie Door?
How Much Does It Cost To Install a Doggie Door Yourself?
A doggie door can cost you anywhere between $100 and $400 depending on any additional features you may want.
Installing it yourself saves you the cost of labor, but you will need additional materials like wood for the frame, and plastic for the flap, not to mention any weatherproofing features you may want to add and tools to do the job.
In a nutshell, expect to spend between $400 and $700 on installing a doggie door yourself. If you already own the tools and are using recycled materials then the installation will only cost you the price of the door.
How Do Can I Install A Doggie Door Myself?
To install a doggie door yourself you will need the following materials:
- A measuring tape
- A drill
- A level
- A jigsaw
- Builders felt
- A hammer
- Measure your dog, you will need to measure the height and width of your dog and allow at least an inch on either side so they can fit through the hole comfortably
- Make a frame from wood or other recycled materials using these measurements. The inside fo the frame should be set according to the measurements of your dog.
- Take the frame and create a rectangular template from cardboard using your dogs’ measurements – at this point, adjust the size of the template to accommodate the thickness of the frame
- Stick the template to the door and use the level to make sure that it is straight
- Drill inspection holes at each corner of the template and at regular intervals around the outside of the template
- Use the jigsaw the cut a straight line around the template
- The frame should fit inside the hole, you can secure it with screws or wood glue, or both.
- For weatherproofing, cut a piece of builders felt 4 inches wide and nail it around the outside of the doggie door. The bottom piece will need to be long enough to reach the ground.
- Cut a piece of soft PVC plastic to make the covering for the exterior opening. Attach at the top of the doggie door using nails.
And there you go, follow these instructions to build a basic doggie door in any wooden door.
Can You Install a Doggie Door into a Brick Wall?
Doggies doors can be installed in brick walls but the job requires professional masonry tools and expertise.
Installing a doggie door in a brick wall yourself is a difficult task unless you are professionally trained. Therefore if you wish to have a doggie door in a brick wall it is best to hire a professional to carry out the works to prevent any unnecessary damage.
Can You Put a Doggie Door on an Interior Wall?
Yes, you can install a doggie door on an interior wall. The process works the same as installing a doggie door on an exterior wall.
However, if your home has more than one floor, some of your interior walls may act as supporting walls. Supporting walls carry the structural load of your upper floors and will be significantly weakened if a large hole is cut into them.
Therefore make sure the spot you want your doggie door to be installed is not a supporting wall to avoid any damage to your home.
If you are at all unsure, call a professional who will be able to tell you the safest place to install your interior doggie door.
How Much Does It Cost to Install a Doggie Door in a Wall?
Installing a doggie door in a wall is more costly than in a door, on average. Wall installations cost around $500 to $2000 depending on the materials you use and the type of door you wish to install.
Installing a doggie door in a wall may be a little pricier than in a door, but it is much more convenient. It is much easier to fill a hole in a wall than in a door if you no longer need the doggie door.
How Do I Stop Rain Coming in Through My Doggie Door?
To weatherproof your doggie door for no rain comes through at all you will need to install airtight seals into your doggie door.
After installing the frame, seal the edges with sealer, wait for them to dry, sand them down and paint over them (if installing in a door). Then find a flap that has magnetic edges, so that the flap stays shut during hard rain and strong winds.
Can I Buy A pre-Cut Doggie Door?
Yes, you can buy pre-cut doggie doors, they come in a range of preset sizes, so all you have to do is measure your dog and find the closest match.
This usually works out fine for most dog owners and is easier than making the frame yourself and adding any safety features as they usually come built-in.
However, if you have a dog of unusual size, then you may struggle to find the perfect doggie door, they may be just that little bit too small or too large.
If this does not bother you then go ahead, pre-cut doggie doors are often the easiest option if you installing the doggie door yourself, however, it is always best to opt for a door that is a little too large than a little too small so your dog can fit through easily.
What Are The Benefits of a Doggie Door?
Doogie doors have many benefits such as:
- Allowing your dog to come and go as they please
- Your dog does not have to hold their toileting needs
- Easy access to the outdoors helps mental stimulation
- The freedom can improve your dogs’ confidence
- An easy escape from danger such as a fire
- Easily shelter from bad weather
- No more scratches on your door!