Dog Clippers FAQ (13 Questions Answered)

Taking your dog to the groomers regularly can add up in cost over time. You may be looking at exploring options to groom your dogs at home.

Home grooming may seem overwhelming at first and it certainly is not always an easy task. You likely have a lot of questions.

This article will cover some of the most commonly asked questions about dog clippers and you can be a dog grooming expert in no time!

Why Do Dog Clippers Have Two Speeds?

Dog clippers have two speeds to best serve the dog coat they are cutting. For dogs with a thin coat or needing a small trim, a one-speed clipper is fine but for dogs with thick coats or matted areas, a two-speed clipper is needed to produce a slower more effective cut for these tough coats.

What Do The Numbers Mean On Dog Clipper Blades?

The numbers on dog clipper blades indicate the size of the blade and blade guard. This will determine the closeness of the cut it provides. The higher the blade number, the closer the cut.

How Do You Use Dog Clippers For Beginners?

  • Read up on your dog breed and grooming requirements to ensure you use the right blade number
  • Read the safety instructions on your clippers to keep both you and your pooch safe
  • Use the blade guard to keep the cut consistent and to keep from cutting the skin
  • Use sharp blades and change the blade as needed
  • Make sure your dogs fur is dry and tangle-free

What Should I Look For In Dog Clippers?

When choosing your new set of clippers you should look for something that is designed for your dog’s breed or a breed with a similar coat. This will ensure the clippers work as required. You should look for the clippers that make the least amount of noise to reduce stress on your dog while grooming. Choose something that feels comfortable in your hand and has a long battery life.

Can I Use Pet Clippers To Cut My Hair?

The blades are massively different between pet clippers and human clippers. So while you probably cut human hair with pet clippers it’s not recommended and you could cause pain and injury in the form of pulling and nicks from the blade. Using pet clippers may also cause a poor result in a haircut as human hair is drastically different from dog fur. 

How Do You Groom A Dog With Andis Clippers?

  • Chose the blade depending on the desired length of fur 
  • Set up the Andis clippers as per the provided instructions, adhering to safety guidelines
  • Restrain your pet calmly
  • Hold the clippers firmly and run them lengthwise down your dog
  • Ensure you are pulling the skin tight as you go to prevent cutting loose skin

What Is The Difference Between A 7 And A 7f Clipper Blade?

Both number 7 clipper blades leave 1/8 of an inch of fur but in different textures. 7F will give a short but textured look and 7 will give you a close and smooth look. F stands for “finish” meaning the F blades give a finished look over a clipped look of the regular blades.

What Length Is A 5 Blade?

A number 5 blade on pet clippers will leave 1/4 of an inch of fur on the groomed dog.

Is It Easier To Shave A Dog Wet Or Dry?

It is easier and safer to shave a dog when it is completely dry. Most clippers indicate in the instructions to ensure the dog is completely dry before shaving to protect them from tears and cuts in addition to keeping clippers in good condition.

Do You Bathe A Dog Before Or After Grooming?

You should bathe your dog thoroughly before grooming to rid their coat of any dirt. Dirt can clog up the clipper blades and make clipping a lot more difficult, resulting in a higher risk of injury. If your dog has matted hair you may want to groom the dog before a bath. If matted hair gets wet it can become a nightmare to clip away.

Can I Use Regular Clippers On My Dog?

Human clippers should not be used to groom your dog. The teeth of blades on regular clippers are a lot closer together and can easily catch and tear your dog’s fur as it is very different from human hair. The risk of injury to your dog is higher if you use regular clippers on them. Regular clippers are also louder and vibrate more than dog clippers and can startle your pet, making grooming much more difficult.

What Dog Breeds Should Not Be Shaved?

Dog breeds that have a double coat should not be shaved. The topcoat of double-coated dog breeds is important to protect their skin from the sun. The bottom coat exists for insulation over wintertime and will be shed when the cold weather ends. 

Double coat breeds include:

  • Terriers
  • Huskies
  • English, German, and Australian Shepherds
  • Sheepdogs
  • Newfoundlands
  • Collies
  • Retrievers
  • Chows
  • Pomeranians
  • Bernese Mountain Dogs
  • Corgis
  • Schnauzer
  • Pomeranians

This is not an exhaustive list. Ensure your research the coat qualities of your dog’s breed!

What Clippers Do Professional Groomers Use?

The clippers used by professional groomers will vary depending on preference and budget. Andis and Wahl are two of the leading brands that produce pet clippers of a professional standard.

What Are The Best Dog Clippers For Home Use?

The best dog clippers for home use are similar to those professional groomer use. To get professional results you should use professional tools. Opt for similar brands such as Andis and Wahl. The clippers you get will depend on your dog’s grooming requirements and your budget.

What Is The Difference Between Pet Clippers And Human Clippers?

Human clippers have blades with teeth set much closer together to trim fine human hair. Pet clippers have blades that are designed particularly for the various types of pet hair and coats. Pet clippers also have quieter motors and do not heat up as quickly as human clippers.